ALTURION LLCAdvanced surface technologies

Technical information

Review coating properties, antimicrobial evaluations, compatible surfaces and application guidance before specification.

Performance properties

Review the properties of the two-component clear coat against your application's requirements.

Built to perform

Performance properties of the two-component clear coat.

Confirm application-specific performance and suitability before specification.

4H

Pencil hardness

Hard, scratch-resistant cured film.

Low

VOC content

Low-VOC, EPA-compliant formulation.

High

Solids

High-solids build for durable coverage.

UV

UV resistant

Holds up to sunlight without yellowing.

Chemical

Chemical resistant

Withstands cleaners and solvents.

Corrosion

Corrosion resistant

Shields substrates from corrosion.

Impact

Impact resistant

Absorbs knocks without cracking.

Graffiti

Graffiti resistant

Marks and paint wipe away cleanly.

Weather

Weather resistant

Performs across demanding climates.

550°F

Service temperature

Rated to 550°F service temperature.

Repairable

Repairable finish

Damage can be spot-repaired in place.

Approx. 1200

Sq ft per unit

Approx. 1200 sq ft per unit coverage.

Performance, protection and value

Performance

  • Industrial-grade durability
  • Excellent UV resistance
  • Chemical resistance
  • Impact resistance
  • Graffiti resistance

Protection

  • Patented Quick Kill Technology
  • Long-term antimicrobial activity
  • Broad-spectrum effectiveness
  • Repairable finish

Value

  • Lower maintenance
  • Extended asset life
  • Clear, invisible finish
  • EPA-compliant coating formulation

Antimicrobial effectiveness is subject to the evaluation qualifications; continuous protection depends on the coating remaining intact.

Coating comparison

Review the stated coating features alongside the application-specific qualifications.

The difference is not a better finish — it is a different category. Ordinary coatings protect how a surface looks. Alturion LLC protects what the surface does.

Coating comparison
Traditional coatingsAlturion LLC coatings
Protect appearance onlyProtect appearance and the surface
Passive finishActive antimicrobial technology
Standard durabilityHigh-performance durability
Conventional finishRepairable finish
Limited functionalityMulti-layer performance

Others cover the surface. Alturion LLC defends it.

Antimicrobial statements retain the evaluation qualifications and coating-intact condition.

How the coating works

Simplified coating illustrationSurface · Clear coating · Cured film

A thin-film protective layer is applied to the surface.

Protection depends on the coating remaining intact. Confirm current, application-specific efficacy and regulatory claims with Alturion LLC before specification. Efficacy qualifications

Explore the Quick Kill Technology mechanism and the conditions that apply to its antimicrobial claims.

The active coating layer draws negatively charged pathogens to the positively charged cured surface.

Passive film

Covers the surface — contamination remains, exposed.

Active protection

Negatively charged pathogens are drawn to the positively charged cured coating, then destroyed on contact.

Illustrative coating schematic. Protection persists as long as the coating remains intact. Confirm current, application-specific efficacy and regulatory claims with Alturion LLC before specification. Review the organism-specific qualifications.

  1. Apply Alturion LLC coating

    A thin-film protective layer is applied to the surface.

  2. Protective layer cures

    The coating hardens into a durable, bonded film.

  3. Pathogens contact

    Negatively charged pathogens meet the coated surface.

  4. Attraction

    Positively charged antimicrobial technology draws them in.

  5. Neutralization

    Pathogens are destroyed on contact with the surface.

  6. Continuous protection

    Defense persists as long as the coating remains intact.

Evaluated organisms

Read the evaluation scope and qualifications alongside each organism claim.

Evaluated organisms

Alturion LLC’s quick-kill technology has been evaluated against a range of clinically significant bacteria and viral surrogates.

MRSA
Methicillin-resistant
VRE
Vancomycin-resistant
E. coli
Escherichia coli
Salmonella
Salmonella enterica
MS2
Bacteriophage
COVID-19
Preliminary testing*

Surfaces and application

Compatible surfaces

Review the complete surface list, then confirm suitability for the intended application.

One versatile system, engineered to bond across a wide range of substrates — from structural materials to soft finishes — without a specialized coating for every surface.

  • Concrete
  • Wood
  • Plastic
  • Metal
  • Paint
  • Laminate
  • Vinyl
  • Ceramic
  • Fabric
See the application overview →

Preparation, application and cure

Prepare the surface, apply the coating, then allow it to dry and cure.

Preparation, application and cure

Review the application overview, methods and the distinction between dry-to-touch time and full cure.

A straightforward, thin-film process — no specialized equipment, no complex chemistry on site. Prepare, apply, cure, and protect.

  1. Surface preparation

    Clean and prepare the substrate.

  2. Apply

    Thin-film application to the surface.

  3. 24 hours dry

    Coating dries to the touch.

  4. Three-day cure

    Full cure develops durability.

  5. Years of protection

    Long-term, active defense.

    Protection depends on the coating remaining intact.

Dry to touch at 24 hours is distinct from full cure at three days. No quantified warranty duration or additional mixing/safety instructions are supplied here.

Application methods

Roller

Fast, even coverage on broad, flat surfaces.

Brush

Precise control for edges and detail work.

Microfiber pad

Ultra-thin, uniform film for a clear finish.

Back to applications